HOLDRITE® HYDROFLAME™ CUSTOM BUILT

    OPTIONAL PIPE SIZE SLEEVES

    W, L and T ratings achievable depending on penetrating items

    Flat Form Deck Sleeves
    • UL Listed firestop device
    • Interior mid-body seal provides water resistant penetration
    • Built-in fire protection
    • Custom cut to your specified height at no extra cost
    • Each sleeve accepts a range of pipe sizes between ½” and 6”: ½”-1”, 1¼”-2”, 2½”-3”, 3”-4” or 5”-6”
    • Includes OSHA compliant safety cap/hole cover
    • Allows for movement and off-center piping
    • Reduced time to dry floors and finish building
    • Suffix – “W” added to the model number provides for a water dam.
      *Sleeve is made with 4” schedule 40 PVC to accept a 4×3 closet flange glued to riser.
    Model Numbers

    CUSTOM BUILT FLAT FORM DECK OPTIONAL PIPE SIZE SLEEVES

    Model Number Penetrating Pipe Type(s)Pipe O.D.Nominal Pipe Size
    OPS-PL-0100 ½ to 1 Inch Plastic and Metal Pipes .625"-1.5" 1”
    OPS-PL-0200 1¼ to 2 Inch Plastic and Metal Pipes 1.375"-2.5" 2”
    OPS-PL-0300 2½ to 3 Inch Plastic and Metal Pipes 2.625"-3.5" 3”
    OPS-PL40-0300*Glue in a 4x3 PVC Closet Flange3.5”3”
    OPS-PL-04003 - 4 Inch Plastic Plastic and Metal Pipes3.125"-4.5"4"
    OPS-PL-0600 5 to 6 Inch Plastic Plastic and Metal Pipes 5.125"-6.625" 6”
    OPS-MT-0100 ½ to 1 Inch Metal Pipes .625"-1.5"1”
    OPS-MT-0200 1¼ to 2 Inch Metal Pipes 1.375"-2.5" 2”
    OPS-MT-0300 2½ to 3 Inch Metal Pipes 2.625"-3.5" 3”
    OPS-MT-04004 Inch Metal Pipes4.125"-4.5"4"
    OPS-MT-0600 5 to 6 Inch Metal Pipes 5.125"-6.625" 6”
    Resources
     

    Copyright © 2018 HOLDRITE. All rights reserved. HOLDRITE and all its respective brands and trademarks are a part of RWC global network. | 14284 Danielson Street Poway, CA 92064 | 800-321-0316